Water Based Acrylic Dry Lamination Adhesive Glue For PET/ BOPP/ MPET Film To Paper laminating

   It is benzene/toluene free water based acrylic polymer emulsion adhesive designed for dry bond /heat seal laminating process.

Special for bopp film with prints by dry laminating machine or dry laminator processing .

Dry bond lamination is the process of coating the adhesive to plastic film, drying the adhesive with heat and air flow and then laminating the adhesive to a second substrate(paper/paper board/cardboard etc..) via a heat compression pressure.

and at the same time can be slitting by manual or by sensor cutting machine.

Feature:

1) Excellent coating performance, using at fully-automatic or semi-automatic dry laminating machine;

2) Suitable for BOPP,PET film and paper's laminating, strong bonding strengthand good power-cover ability;

3) Excellent lustrousness and transparency against ageing and yellowing;

4) Environmentally safety suitable for packing of food, drug, alcohol and tobacco, children’s toys etc;

5) Using water to clean the machine after used. Improving produce environment, eliminating electrostatic fire accident happen during the oily product draping and ensuring the health of production staff;

6) The product has passed SGS ROHS test.

Advantage:
1. Lower consumption than oil / solvent based lamination adhesives. non toxic .no harmful to healthy.
2. water based adhesive, free of toluene, eco-friendly.
3, Easy to clean the lamination equipment.
4, can be use for highest speed automatic dry lamination machine.can run speed 45m-100meters/Minitues

Suggestion:

1, Before lamination, raise the temperature of the laminating machine roller to 95-110℃, the temperature of the drying tunnel to 80-95℃.

2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive disperse on roller evenly,
The amount of adhesive consumption shall be flexibly adjusted according to the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95℃, the roller pressure shall be around 6-20kgs.
4, the pressure roll shall be controlled flexibly to ensure no adhesive over flow from both sides of film and connections.

Notice:
1, Clean the adhesive tank and roller before use our adhesive;
2, Directly use ,Do not mix our adhesive with other chemicals;
3, Our adhesive only apply for BOPP film with over 38 Dyne ;/PET /Metalized film .
5, Better make testing for with film or paper, before mass production, to check the color retention or bonding strength;

suitable for laminating machine